SDI Aura Bulk Fill

• Natural-looking finish with just one universal shade
• High depth of cure without the need for a capping layer
• Easy placement in a matter of seconds
• The waxy consistency is packable and non-stick to optimize handling
• Low volumetric shrinkage(2.21%)-aura bulk fill delivers reduced stress to provide long lasting restorations
• Excellent flexural strength(115MPa)-aura bulk fill resists major deformations without fracturing
• High compressive strength(375MPa)-aura bulk fill resists the high forces of compression in the mouth.

TECHNICAL DATA:

High Compressive Strength : 375 MPa

Excellent flexural strength : 115 MPa

Low volumetric shrinkage : 2.21%

STORAGE AND HANDLING

• Store at temperatures between 10° and 25°C (50°-77°F)
• Use at room temperature between 20° and 25°C (68°- 77°F)
• Syringe system: when not in use replace the cap tightly.

PRECAUTIONS

• Avoid prolonged contact of aura bulk fill with the skin or oral tissue, as it may cause inflammation of the oral tissues or skin sensitization
• For professional use only
• Keep out of reach of children
• Do not take internally
• Do not use after expiry date
• Do not expose material to direct light

• 1 x 4g syringe refill

Directions To Use :

Follow these steps:

1. Isolate tooth

2. Prepare cavity using standard technique for composite resin restorations.

Note: In cases where pulp protection is necessary, use a calcium hydroxide liner

3. Apply a dentin/enamel bonding agent such as SDI Go! as per manufacturer’s instructions

4. Place aura bulk fill no more than 5mm thick

5. Light cure for 20 seconds using a high powered LED curing light (460 - 480nm wavelength)

6. Finish restoration using standard technique.