Itena Totalcem (TR)

Itena Totalcem (TR)

₹3,070.00 ₹3,400.00 -10%
Brand: Itena
Product Code: ITNA-T(TR)
Availability: In Stock

OverView

Itena Totalcem (TR)

Itena Totalcem (TR)

Self-etching and self-adhesive permanent resin luting cement

For cementation of: 

  • crowns bridges posts
  •   inlays & onlays
  • Self-adhesive on: enamel, dentine, metal
  •  ceramic, porcelain, zirconium composites

 “Finally, a self-etching/self-bonding cement where you can almost feel the low film thickness and that your restorations are seating completely! For my own practice, it is a time and money saver with equal or better results to any cement in its class.”- Dr. Louis Malcmacher, President, American Academy of Facial Esthetics

 Advantages

All in one! Etching + Primer + Bonding + Cement

Exceptional bonding strength: on enamel: 20MPa on dentine: 15MPa

Dual curing (Light- or self-curing) :     Guaranteed curing in areas with limited light penetration

                                                              Optimized gel state for an easy removal of excess: simply cure for 3-4s

3 types of intra-oral tips: (fine, extra-fine and ultra-fine Colibri)

No post-operative sensitivity

Extremely thin film (10 μm)

Not soluble in the oral fluids

Perfect seal

Radiopaque 250% of Al

Fluoride release

Can be used on vital teeth

2 shades available: Universal A2 & Translucent

Long term shade stability

Can be kept at room temperature: no need to refrigerate!

  • Hints and Tips
  • Before applying TotalCem, the dentine must be dry, but not too dry
  • For inlays and onlays, etching the enamel edges with phosphoric acid is recommended, in order to increase the bonding strength (while taking care of not spreading over onto the dentine)
  • How to clean the root canal before applying TotalCem, in order to have an optimum cementation: Remove all residues of gutta percha with a calibrated drill. Pass over it with an ultrasonic probe. Rinse well and dry without over-drying. Apply TotalCem with an extra-fine intra-oral tip
  • TotalCem has not been developed to adhere to enamel with no mechanical support (eg. dental brackets, veneers)
  • During the setting of a ceramic inlay or a zircon crown, the following procedure can be followed to improve cementation: Apply hydrofluoric acid for 1 to 3 minutes, rinse thoroughly, dry, then apply silane (DentoBond Porcelain Fix)


Key Specifications :

Properties

  • Adhesive bonding to un-etched bovin dentine:  15 MPa
  • Adhesive bonding to Rexillium:  20 MPa
  • Film thickness: 10 μm
  • Radiopacity, % Aluminium:  250
  • 1-week Cumulative
  • Fluoride release:  40 ng/cm2
  • Working time:  2 min
  • Setting time:  3.5 min
  • Compatible with Halogen light:  Yes
  • Compatible with Plasma arc light:  Yes
  • Compatible with LED:  Yes
  • Compressive strength:  180 MPa
    • Flexural strength:  170 MPa
    • Hardness (by Barcol):  80

    Directions to use :

    Applications:

      • Water sorption:   12 μg/mm3
      • Solubility:   7 μg/mm3
      • Adhesive bonding to un-etched tooth enamel:   20 MPa

      Packaging:

      • 1 x Automix syringe (8 g)
      • 10  x Mixing tips 
      • 10 x Thin intra-oral tips 
      • 10 x Extra-thin intra-oral tips

      Write a review

      Note: HTML is not translated!
          Bad           Good