• Quick and direct application from the new NDT-syringe
• White for application control
• Excellent flow properties and low viscosity
• High stability and good adhesion to enamel
• Perfect marginal adaptation
• Clinically proven for years
• Continuous fluoride release
• Fissurit F in the new NDT-syringe

• Key Specifications :

• Store Fissurit/Fissurit F at temperatures between 4 °C - 23 °C and protect from light.

Directions To Use :

Application:

• Carefully apply and disperse Fissurit/Fissurit F with a brush or any other suitable instrument. Remove any air bubbles (e.g. with a fine probe).

Syringe application:

• Remove the protective cap from the syringe. Place a new cannula on the Fissurit F syringe. To avoid air bubbles, hold the syringe vertically and press the material up to the tip of the cannula. Fissurit F homogeneously flows from the cannula upon light to medium pressure.
• In order to ensure the functioning of the non-dripping syringe do not pull back the plunger during or after use.
• Apply Fissurit/Fissurit F from the margin into the fissure or cavity and let penetrate for 15 - 20 s. Remove any air bubble (e. g. with a fine probe). 

Light-curing:

• Polymerise Fissurit/Fissurit F for 20 s per surface and check the sealing. To light-cure this material conventional polymerisation devices are suited. The light output should be a minimum of 500 mW/cm2 on halogen poly- merisation devices and 300 mW/cm2 on LED devices. Re-seal deficit areas, remove excess cautiously (e. g. finishing diamond) and polish if necessary (rubber polisher). Finally apply a fluoride varnish on the treated and neighbouring, preferably on all teeth.

• Packaging:

• 2 x 2g Syringes