Shofu BeautiSealant Pit & Fissure Sealant

• Pit and Fissure Sealant

 Features

• • BeautiSealant self-etch primer features dual adhesive monomers to thoroughly prime the tooth surface for an effective chemical bond to the sealant while minimizing any damage to enamel.
  • The HEMA-free formulation of the primer prevents bond hydrolysis over time.
  • BeautiSealant paste exhibits a superior surface cure property for a durable seal.
  • Ideal viscosity and an efficient non-drip, fuss-free syringe design with an extra fine 27 gauge needle tip assures precise delivery of the smooth, bubble-free paste into difficult to reach fissures without the hassle of overfilling grooves.
  • Exhibits high shear bond strength for long-term durability and retention
  • Inclusion of S-PRG fillers provides a fluoride rich environment and a unique anti-plaque effect
  • Fluoride rich environment
  • Anti-bacterial and anti-cariogenic property
  • Acid-buffering capacity that neutralizes the effects of acidogenic bacteria
  • Arrests demineralization and promotes remineralization of enamel
  • Unique Anti-Plaque effect

  Description

  BeautiSealant is a fluoride releasing pit and fissure sealant that seals deep grooves and fissures while providing all round protection especially during the caries-prone years through the sustained release and recharge of fluoride.
  Unlike conventional sealants that require phosphoric acid etching that dehydrates and demineralizes healthy tooth structure
  BeautiSealant provides a safer, simpler and more predictable option that completely eliminates the need for a conventional phosphoric acid etch

  Primer:

  • Acetone
  • Distilled water
  • Carboxylic acid monomer
  • Phosphonic acid monomer and others

  IDEALLY USED FOR:

  • As a pit & fissure sealant

  ADVANTAGES:

  Gentle on Enamel:

  Conventional sealants require phosphoric acid etching which can dehydrate and demineralize healthy tooth structure. BeautiSealant self-etch primer contains dual adhesive monomers that thoroughly penetrate into deep pits and fissures to prime the tooth surface for an effective chemical bond to the sealant while minimizing any damage to enamel.

  This HEMA-free formulation also prevents hydrolysis at the bonding interface for long-term stability and retention. The self-etch primer conditions the enamel surface to make it more reactive that in turn enhances the flow of the sealant paste into the pits and fissures.

  Effective Delivery:

  An efficient non-drip, fuss-free syringe design and an extra fine 27 gauge needle tip assures precise delivery of the smooth, bubble-free sealant without the hassle of overfilling the grooves, a common problem encountered with conventional delivery systems.

  “Giomer Concept”:

  

  A member of the Giomer family of restoratives, BeautiSealant is based on Shofu’s proprietary S-PRG filler technology, where a stable glass ionomer phase is formed to provide the benefits of fluoride. The glass core with glass ionomer phase is protected with a trilaminar surface structure that allows controlled release and recharge of fluoride while maintaining structural integrity.

  Remarkable Adhesion:

  BeautiSealant with its self-etch primer exhibits an equally durable bond to enamel as other traditional sealants that employ an aggressive phosphoric acid etch. The material surface is optimally cured to guarantee a reliable seal.

  

  Key Specifications

  COMPOSITION:

  Paste:

  • Fluoroboroaluminosilicate glass
  • UDMA
  • TEGDMA
  • Micro fumed silica and others

  Packaging

  Shofu BeautiSealant Complete Set:

  • 1 x 1.2g Syringe BeautiSealant Paste
  • 1 x 3ml BeautiSealant Primer
  • 50 x Microbrush Fine (Pink)
  • 25 x V-Dish

  Shofu BeautiSealant Refill:

  • 1 x 1.2g Syringe BeautiSealant Paste
  • Needle Tips

  Direction to Use

  1. Cleaning of tooth surface Clean the tooth surface following the standard method

  2. Isolation Isolate with rubber dam etc following the standard method

  3. Preparation

  3-1. When storing these materials in a refrigerator, allow them to reach room temperature before use

  3-2. Attach a needle tip following the procedures below: ¾Remove the shield cap by turning it slowly ¾Attach a needle tip by turning it in clockwise until it is securely attached

  4. Pretreatment of tooth surface Dispense adequate amount of Primer on a V-DISH. Apply on the enamel surface of the pit and fissure using a brush. Leave undisturbed for 5 sec

  

  5.Gently air blow for about 3 sec and then dry with stronger stream of air until a thin and uniform bonding layer is obtained. ¾Primer must be closed immediately after dispensing as it contains volatile components

  

  6. Filling of the paste Apply necessary amount of the paste directly to the pit and fissure or it may also be extruded onto a paper pad to be applied to the pit and fissure with a suitable instrument. ¾The paste dispensed onto the paper pad should be shielded from ambient light by light-shielding cover to avoid unintended polymerization of the material

  

  7. Light-curing Light-cure using a dental light-curing unit

  

  8. Removal of uncured material Remove uncured material on the surface with an alcohol moistened cotton ball etc.