NeoEndo S Rotary Files 21mm

NeoEndo S Rotary Files 21mm

₹1,165.00 ₹1,560.00 -25%
Brand: NeoEndo
Product Code: NENDO -S FILE-21MM
Availability: In Stock

OverView

harp...

Available Options

harp cutting edge, Rotary Files,

Neoendo S rotary file is designed to have a special S-shaped cross-section.

This allows minimum radial wall contact which translates to reduced stress on the file.

In addition, the excellent upward debris auguring ensures that the debris isn’t pushed apically or packed into the apical third. Further, proprietary heat treatment ensures that the file remains highly flexible and resistant to fracture.

 

INDICATION-

  • Used in endodontics. These files are most flexible and with high cutting efficiency.

 

ADVANTAGES:

  • Cross-section.
  • Sharp Cutting Edge.
  • Flexible NiTi Wire.
  • Progressive Pitch.
  • Safety Tip.
  • Length Marking.
  • Tip Size Indicator.

FEATURES:

  • CROSS-SECTION- 

    • The cross-section of files is like the alphabet “S”

    SHARP CUTTING EDGE- 

    • The two blade cutting surface increases the cutting efficiency

    FLEXIBLE NiTi WIRE- 

    • Proprietary heat treated NiTi wire with high fracture resistance

    PROGRESSIVE PITCH- 

    • Progressively increasing pitch avoids screw-in effect

    SAFETY TIP- 

    • Non-cutting safety tip helps to reduce ledge formation, minimize canal transportation & reduce apical extrusion

    LENGHT MARKETING- 

    • Helps to control the working length during preparation

    TIP SIZE INDICATOR- 

    • The colored ring indicates the tip of instrument

    TAPER INDICATOR- 

    • One ring-0.04 Taper | Two Rings- 0.06 Taper
  • KEY SPECIFICATIONS:
    • Speed- 400 RPM
    • Torque- 2 NCm

    DIRESCTIONS TO USE:

    STEP 1:

    • Prepare the access cavity and explore the canal using #8, #10 K-file or #12 Neoprobe File

    STEP 2:

    • Establish the working length with the help of Electronic Apex Locator(EAL)/ Radiograph

    STEP 3:

    • For obliterated, calcified or severely curved canals: start with #8, #10 K-File or use Neoendo Flex Glide Files till apex to achieve proper glide path

    STEP 4:

    • Use the file in brushing motion: take the file passively to the point of least resistance and brush out of the canal and repeat the procedure until working length is achieved

    STEP 5:

    • Always clean the cutting flutes after every few strokes, irrigate the canal and recapitulate with the K-File

    STEP 6:

    • Use Neohybrid files with gentle touch, never force the file and always use the recommended speed and torque settings

    PACKAGING:

    • Pack of 4 files

    Neoendo S Rotary Files 21mm Assorted-

    4 Files Pack

    • 17/4%
    • 20/4%
    • 25/4%
    • 25/6%

    Write a review

    Note: HTML is not translated!
        Bad           Good