Itena Totalcem (TR)

Self-etching and self-adhesive permanent resin luting cement

All in one! Etching + Primer + Bonding + Cement

Exceptional bonding strength: on enamel: 20MPa on dentine: 15MPa

Dual curing (Light- or self-curing) :     Guaranteed curing in areas with limited light penetration

                                                              Optimized gel state for an easy removal of excess: simply cure for 3-4s

3 types of intra-oral tips: (fine, extra-fine and ultra-fine Colibri)

No post-operative sensitivity

Extremely thin film (10 μm)

Not soluble in the oral fluids

Perfect seal

Radiopaque 250% of Al

Fluoride release

Can be used on vital teeth

2 shades available: Universal A2 & Translucent

Long term shade stability

Can be kept at room temperature: no need to refrigerate!

• Hints and Tips

• Before applying TotalCem, the dentine must be dry, but not too dry
• For inlays and onlays, etching the enamel edges with phosphoric acid is recommended, in order to increase the bonding strength (while taking care of not spreading over onto the dentine)
• How to clean the root canal before applying TotalCem, in order to have an optimum cementation: Remove all residues of gutta percha with a calibrated drill. Pass over it with an ultrasonic probe. Rinse well and dry without over-drying. Apply TotalCem with an extra-fine intra-oral tip
• TotalCem has not been developed to adhere to enamel with no mechanical support (eg. dental brackets, veneers)
• During the setting of a ceramic inlay or a zircon crown, the following procedure can be followed to improve cementation: Apply hydrofluoric acid for 1 to 3 minutes, rinse thoroughly, dry, then apply silane (DentoBond Porcelain Fix)

Key Specifications :

Properties

• Adhesive bonding to un-etched bovin dentine:  15 MPa
• Adhesive bonding to Rexillium:  20 MPa
• Film thickness: 10 μm
• Radiopacity, % Aluminium:  250
• 1-week Cumulative
• Fluoride release:  40 ng/cm2
• Working time:  2 min
• Setting time:  3.5 min
• Compatible with Halogen light:  Yes
• Compatible with Plasma arc light:  Yes
• Compatible with LED:  Yes
• Compressive strength:  180 MPa
• • Flexural strength:  170 MPa
  • Hardness (by Barcol):  80

Directions to use :

Applications:

• • Water sorption:   12 μg/mm3
  • Solubility:   7 μg/mm3
  • Adhesive bonding to un-etched tooth enamel:   20 MPa

Packaging:

• 1 x Automix syringe (8 g)
• 10  x Mixing tips 
• 10 x Thin intra-oral tips 
• 10 x Extra-thin intra-oral tips