My cart

0 item(s) ₹0.00

  • Your shopping cart is empty!

Unident Dental Mechanical / Flask Press
Unident Dental Mechanical / Flask Press
Unident Dental Mechanical / Flask Press

Unident Dental Mechanical / Flask Press

0 reviews
₹5,660.00 ₹5,900.00 -4%
Brand: Unident
Product Code: UNDNT-DM/FP
Availability: In Stock

Dental Mechanical / Flask Press


Dental Mechanical / Flask Press is used in dental prosthodontic laboratories to load acrylic pressure packs for complete dentures and partials denture. The unit's self-contained hydraulics allow up to 3500 pounds of force with minimal physical effort by means of a hand lever.

 

INDICATION:

  • The is used to press flask to remove air bubbles.

 

ADVANTAGE:

  • strong 
  • Easy handle
  • Simple

Features  :

  • Built for use with 2 (two) muffles.
  • Pressure gauge.
  • Full control at different stages of pressing.
  • Required to work in laboratories, since the operator can control the pressure in the muffle.
  • Little effort is required.
  • It does not risk the operator.
  • It provides dimensional stability of the prosthesis.
  • The press does not require any special installation and initial processing before the operation.
    Install on a flat level surface, so that it is stable to work, ensuring the proper height for handling.

Key Specifications   :


Weight9.7 kg
Operation mode Manual
MaterialMetal
 Usage/ Application 

Unident


Directions To Use :


Step 1:

  • Prepare the flask for pressing.


Step 2:

  • Place the flask on the flat surface.


Step 3:

  • Turn the center spindle for the right to play the flask flange.
  • Note: To reach the limit, exert a slight force on the muffle.

 

Step 4:

  • Make sure the release valve is closed by turning the lower lever to the right.
  • Then do the pressure test, moving the hydraulic lever up and down up to 0.5 tons, To drain excess resin.
  • When finishing the flow of excess resin, it will be the ideal choice for the final pressing.


Step 5:

  • Make the final pressing, slowly, moving the hydraulic lever up and down for up to 1.0 ton.
  • As the pressing force The person was decreasing due to the stabilization of the resin inside the muffle (s), move the
    hydraulic lever up and down to stabilize the pressure at 1.0 tons.


Step 6:

  • After the time necessary to work, turn the side lever clockwise to loosen the release valve down to 0
    ton, then turn the center spindle left to free the muffle.



Packaging :
  • 1 x Dental Mechanical / Flask Press

Warranty :

  • Manufacturer/Importer warranty of 1 Year against manufacturing defect
  • Service and Warranty are handled by the manufacturer/importer directly for this product

Write a review

Note: HTML is not translated!
    Bad           Good