Itena Dentocore body (Core Build up)

Corono-radicular restorations

Post cementation

 Advantages

Dual (self- and light-curing)

Polymerization guaranteed, even in the areas which are unreachable with the LED curing unit light.

Rubbery phase allows for removal of excess material

Nanoparticle technology

Enhanced mechanical properties of conventional

Bis-GMA composite 

Cuts like natural dentine and matches the natural tooth

Low polymerization shrinkage

Better marginal adaptation

Excellent compressive strength for long lasting restorations

Fluoride release

Strengthens natural tooth structure and helps to prevent secondary tooth decay

The most radiopaque available!

3 different tips for Automix syringes: Extra-fine, intra-oral and fine and flexible colibri

Properties

• Compressive strength - 248 MPa
• Linear shrinkage - 1.2%
• Flexural strength - 200 MPa
• Diametral tensile strength - 40 MPa
• Water absorption - 2 μg/mm3
• Depth of cure. Irradiation (LED lamp for 20s) - 5.2 mm
• Depth of cure. Irradiation (Halogen lamp for 40s) - 9 mm
• Exotherm temp (°C) - 32°C
• Working time - 1.5 min
• Photo setting time - 20 s
• Auto setting time - 4.5 min
• Radiopacity - 400% of Al

Hints and Tips

While filling a matrix, keep the tip at the bottom of the matrix in order to ensure a good fill. To avoid bubbles when dispensing the composite, take care to keep the tip constantly in contact with the product.

The use of a matrix ensures that the restoration fits the dental core correctly whilst preventing material leaking out into the interdental spaces.

DentoCore Body can be added after polymerization.

DentoCore Body can be used on a vital tooth or a pulpless tooth.

Due to its superior wear and tear resistance, DentoCore Body can be left in the buccal cavity, even without a prosthetic tooth protection.