TECHNICAL DATA:

Transverse strength : > 60 MPa

Transverse modulus : > 4000 MPa

STORAGE& SHELF LIFE:

Store at room temperature (15 to 25 °C/59 to 77 °F)! ▸ Protect against exposure to direct sunlight! ▸ Do not use after the expiration date.

SIDE EFFECTS:

Do not apply the material in cases of allergies to any of the components or in the event of contact allergies.

Supertec is a light-curing impression tray material used for the production of customized impression trays.

Wherever customized impression trays are needed for partial or full dentures, Supertec is the right choice. 
The prefabricated light-curing base plates are easy to form, adapt, and trim. Under normal laboratory light conditions Supertec can be processes for a long time and impresses with its uniform plate thickness.

The finished tray can be used immediately without requiring lengthy post-polymerization. The material’s modulus of elasticity provides excellent dimensional stability maintaining the tray’s original form in the galvanization process. 
In addition, Supertec is resistant to disinfecting agents. And another pleasant plus: Supertec is odorless.

 Supertec: prefabricated plates can easily be formed and trimmed.

Individual jaw tray with Supertec: the basis for precise impressions.

Production of customized impression trays for precision impression taking in the field of partial and full dentures, as well as implantology

COMPOSITION:

Glass filler and pyrogenic silicic acid in an UDMA-based matrix of dental resins

ADVANTAGES:

• Odorless
• Easy to fabricate

DMG Supertec Trays - Upper:

• 50 trays upper jaw

DMG Supertec Trays - Lower

• 50 trays lower jaw

• Easy to form, adapt and trim
• Long working time
• Odorless
• Surplus material can be re-used
• Curing with standard laboratory light-units with UV- and/or halogen light (at least 240 to 520 nm)
• Even thickness