Coltene Fill-Up

Coltene Fill-Up

0 reviews Orders (0)
₹4,030.00 ₹4,800.00 -16%
Product Code: COL-FU
Availability: Out Of Stock
Size Chart


Coltene Fill-Up

Available Options

Coltene Fill-Up

Dual Curing Bulk Composite

Fill-Up! is a dual curing medium viscous bulk composite of the newest generation applied in a single step.

It combines the advantages of resin-based composites with a simplified and time-efficient handling. Owing to its dual curing properties, fillings with Fill-Up! can be administered in arbitrary filling depth without the need of an additional covering layer.

  • faster than the conventional increment technique
  • More economical than the two layer bulk fillings

Welcome on the safe side!

Conventional light curing bulk filling materials are limited in their curing depth, putting into questions whether the restoration fully cures. On the contrary, the dual curing property of Fill-Up! guarantees a thorough curing down to the bottom of every cavity. Moreover, chemical curing minimises shrinkage stress dramatically, preventing micro fractures and postoperative sensitivities. As supported by study, the bonding partner ParaBond caters for a perfect marginal seal comparable to the one of conventional composite - before and after thermo cycling and chewing abrasion – ensuring a secure long-term restorative solution.


• Dental glass
• Amorphous silicic acid
• Methacrylates
• Zinc oxide


  • Class I and Class II fillings
  • Cavity linings
  • Core build-ups

Convenient and fast

Fill-Up! is applied in only one single layer and finished with rotary instruments. The material is easy and quickly polishable to high gloss and is therefore your perfect choice for all Class I and II fillings, cavity lining and core build-ups – every time when a fast and esthetic restoration is needed.

Deep uniform curing No matter what layer thickness is applied, there is no need to worry about thorough curing, as Fill-Up!™ consists of both light and chemically curing properties. Other light curing bulk fill materials can be applied in layers of max. 4-5 mm. Light intensity measurements demonstrate that above a layer thickness of just 1 mm, light penetration drops drastically. Reliable deep polymerization is therefore not always guaranteed, which can lead to postoperative sensitivities.


  • Arbitrary filling depth
  • Minimised shrinkage stress
  • Optimised marginal seal
  • One layer
  • Universal colour, fluorescent and radiopaque
  • Contains zinc oxide
  • Fast and easy procedure


  • Dual-cure
  • Self-curing, independent of layer thickness
  • Cures even with very deep cavities


  • Immediate fabrication of the filling is possible, as Fill-Up! is light-cured for just 5 s
  • No top layer necessary, thanks to outstanding mechanical properties
  • Universal shade (VITA™ A2–A3) provides excellent self-blend properties
  • Fast and simple automix application


  • Minimal shrinkage stress
  • Optimal marginal sealing with the matched ParaBond bonding agent
  • Easy to polish to a high luster
  • Attractive aesthetics under all lighting conditions thanks to fluorescence
  • Contains zinc oxide



Working time1 : 00 min
Setting time (incl. working time)3 : 00 min
Flexural modulus :7.260 Mpa
Flexural strength : 109 Mpa
Water sorption19 µg/mm3
Water solubility 0.7 µg/mm3
Radiopacity 2 mm AI
Vickers hardness51 HV
Volumetric shrinkage (acc. to Watts) 3.30%
Compressive strength  289 MPa Ø
Filler particle size : 2 µm
Filler content by weight : 65%
Filler content by volume 49%
Density 1.8 g/cm3
Working time1 min
Setting time (not incl. working time) 2 min


  • 1 x 4.5g Syringe

Write a review

Note: HTML is not translated!
   Bad           Good