SDI Aura Bulk Fill

SDI Aura Bulk Fill

₹1,470.00 ₹2,000.00 -27%
Brand: Sdi
Product Code: SDI-ABF
Availability: In Stock

Bulk Fill Composite

Aura bulk fill is a light cured, radiopaque, high strength, composite designed to eliminate time consuming layering for posterior restoration. The aura bulk fill has a 5mm depth of cure allowing fast and easy placement when restoring deep cavities.

INDICATIONS

  • Posterior restorations
  • Core buildup
  • Splinting
  • Sandwich technique with glass-ionomer

CONTRA-INDICATIONS

  • Pulp capping
  • Do not use in conjunction with any eugenol containing materials
  • Anyone with allergy to acrylics
Features :
  • Natural-looking finish with just one universal shade
  • High depth of cure without the need for a capping layer
  • Easy placement in a matter of seconds
  • The waxy consistency is packable and non-stick to optimize handling
  • Low volumetric shrinkage(2.21%)-aura bulk fill delivers reduced stress to provide long lasting restorations
  • Excellent flexural strength(115MPa)-aura bulk fill resists major deformations without fracturing
  • High compressive strength(375MPa)-aura bulk fill resists the high forces of compression in the mouth.
Key Specifications :

TECHNICAL DATA:

High Compressive Strength : 375 MPa

Excellent flexural strength : 115 MPa

Low volumetric shrinkage : 2.21%

STORAGE AND HANDLING

  • Store at temperatures between 10° and 25°C (50°-77°F)
  • Use at room temperature between 20° and 25°C (68°- 77°F)
  • Syringe system: when not in use replace the cap tightly.

PRECAUTIONS

  • Avoid prolonged contact of aura bulk fill with the skin or oral tissue, as it may cause inflammation of the oral tissues or skin sensitization
  • For professional use only
  • Keep out of reach of children
  • Do not take internally
  • Do not use after expiry date
  • Do not expose material to direct light
Packaging:
  • 1 x 4g syringe refill

    Directions To Use :

    Follow these steps:

    1. Isolate tooth

    2. Prepare cavity using standard technique for composite resin restorations.

    Note: In cases where pulp protection is necessary, use a calcium hydroxide liner

    3. Apply a dentin/enamel bonding agent such as SDI Go! as per manufacturer’s instructions

    4. Place aura bulk fill no more than 5mm thick

    5. Light cure for 20 seconds using a high powered LED curing light (460 - 480nm wavelength)

    6. Finish restoration using standard technique.

    Write a review

    Note: HTML is not translated!
        Bad           Good