Waldent ProTaper Hand Files

Waldent ProTaper Hand Files

₹1,045.00 ₹2,375.00 -56%
Brands Waldent
Product Code: WOLDNT_PHF
Availability: In Stock
Size Chart

OverView

Ni-Ti protaper hand files (Pack of 6 files)

Available Options

Qty Image FILES ALL Price
Protaper Hand File 19mm - SX ₹1,045.00
Protaper Hand File 21mm - S1 ₹1,045.00
Protaper Hand File 25mm - S1 ₹1,045.00
Protaper Hand File 21mm - S2 ₹1,045.00
Protaper Hand File 25mm - S2 ₹1,045.00
Protaper Hand File 21mm - F1 ₹1,045.00
Protaper Hand File 25mm - F1 ₹1,045.00
Protaper Hand File 21mm - F2 ₹1,045.00
Protaper Hand File 25mm - F2 ₹1,045.00
Protaper Hand File 21mm - F3 ₹1,045.00
Protaper Hand File 25mm - F3 ₹1,045.00
Protaper Hand File 21mm Assorted SX-F3 ₹1,243.00
Protaper Hand Files 25mm Assorted SX-F3 ₹1,243.00

Ni-Ti protaper hand files (Pack of 6 files)

Waldent Protaper Hand Files are quality files which feature a better nickel titanium construction than ProTaper Universal Rotary Files - plus ISO-colored handles
Their variable taper and advanced flute design offer efficiency to achieve consistent shaping, even under calcified canals.

 

FEATURES

  • Easy

                   - Only one instrument sequence whatever the canal shape
                   - Colour-coded and easy to follow protocol
                   - Drying and obturation solutions specifically designed for Protaper® files, with the same colour-codes for instant identification

  • Fast

                  - Only 3 instruments needed for most cases
                  - High cutting power

  • Efficient 

                  - Apical taper for good canal cleaning
                  - Fantastic debris removal due to the unique 'Multiple Taper' design of these instruments

 

PACKAGE CONTENTS

  • 6 Files (Sx,S1,S2,F1,F2,F3)

  • FEATURES:
  • Triangular Cross-Section

    Convex : S1, S2, SX, F1, F2

    Concave : F3

    Triangular concave cross-section : Flexibility

    Triangular convexe cross-section : Resistance

    Safe non cutting tip : acts as a guide

    KEY SPECIFICATIONS:

    Shaping Files Variable Increasing Taper(Eiffel Tower shape)S2 S1 18 S2 20 19 Sx 


    Finishing Files F1, F2, F3 Shape the Apical part of the canal

    Finishing Files(Variable Decreasing Taper)

    F1 3mm 20-7%

    F2 25-8%

    F3 30-9%

    DIRECTIONS TO USE:

    Treatment Sequence

    SCOUTING THE CANAL :

    • Stainless steel K-File 010
    • Stainless steelC+ File08,10,15
    • ProFinder Files 10,13,17
    • Pathfiles

    The lubricating action of Glyde helps the instruments to slide in the canal and Establish working length

    Don’t use Sx deep in the canal
    If needed, use SX with a brushing motion to relocate the orifice of the canal and create a straight line access(don’t use Sx deep in the canal)

    Use S1 with a brushing motion
    and enlarge the canal, no deeper than the level of the penetration of the scouting file(to make sure that the tip of S1is never blocked)Using Pathfile, go to working length that you established earlier 

    After going to length with a stainless steel file size 15, use :
    S1 to working lengthwith a brushing motion.Using Pathfile this step is skipped

    When S1 reaches working length, use :
    S2 to working lengthwith a brushing motion

    When S2 reaches working length, use :
    F1 to working length.CAUTION !NEVER USE A BRUSHING ACTION WITH THE FINISHING FILES !!!When a finishing file reaches the working length,It is immediately withdrawn.

    NEVER USE A BRUSHING ACTION WITH THE FINISHING FILES !!!
    Gauge the diameter of the foramen with stainless steel files and if the foramen is larger than 20, use F2, F3 to working length, according to the real apical diameter.

    PACKAGING:

    6 Files (Sx,S1,S2,F1,F2,F3)


Write a review

Note: HTML is not translated!
    Bad           Good