Voco Polofil Supra Syringe Refills

Light-curing Composite

Polofil Supra :

Light-curing microhybrid composite with Sintraglass multifiller system

INDICATIONS:

• For cavities classes I to V
• Reconstruction of traumatically affected anteriors
• Veneering of discoloured anteriors
• Splinting, locking of teeth

FEATURES:

• Combines the advantages of micro-filled and macro-filled composites
• Non-sticky, good packability
• Abrasion-proof and stable shades
• Low shrinkage
• Durable and resistant restorations
• Low water uptake

INDICATIONS:

• For cavities classes I to V
• Reconstruction of traumatically affected anteriors
• Veneering of discoloured anteriors
• Splinting, locking of teeth.
• 
  

• KEY SPECIFICATIONS :

• For fillings of more than 2 mm, apply and polymerise in layers (cure each layer for approx. 40 - 60 s).
• To light-cure this material conventional polymerisation devices are suited.
• The light output should be a minimum of 500 mW/cm2 on halogen polymerisation devices and 300 mW/cm2 on LED devices.
• The curing depth, depending on the shade, is approx. 2 - 5 mm, when polymerised for 60 s. The curing depth is approx. 2 - 3 mm for translucent shades, if light-curing is done through enamel (approx. 1 mm). Transparent strips, crowns and/or Iight wedges should be used.
• Care should be taken to ensure good marginal adaption.
• Hold the light source of the halogen light as close as possible to the surface of the filling. If the distance is more than 5 mm, the curing depth may compromise. Polymerisation may be limited to the area of the cone of light only.
• Insufficient curing can lead to discolouration and pulp irritation.
• The filling can be finished and polished immediately after removing the transparent strips/crowns (fine or extra-fine grain diamond, polishing discs).
• During finishing and polishing the filling must be cooled.
• The margin of the filling, or even better the entire tooth, should be fluoridated as a final step.
• Polofil Supra can be used for direct and indirect inlays according to the customary methods.
• The physical stability values can be improved by usual external (additional) curing.
• Store at temperatures between 4°C - 23°C.
• Syringes and bonding material bottles should be closed immediately after dispensing to prevent exposure to light.

• 
  

  PACKAGING :

• 1 Refill syringe - 4g